Pelletizer LTD is one of the participants in the lumber market. Our production successfully operates since 2016. Timber processing is carried out on European-class equipment, and our specialists have undergone additional training in accordance with the requirements of the international product quality management system. Our products are supplied both to the domestic market and for export, which is ensured by the observance of interstate standards. The production capacity of our company reaches 2000 m3 per month.

Pallet board — is a specially processed board for the production of pallets, boxes and other containers. To do this, it is necessary to make a pallet in accordance with the requirements of GOST.

      We offer:


  1. Pallet board 1-4 grade from softwood and hardwood
  2. Pallet board for europallets
  3. Pallet board according to requirements
  4. Delivery of our product to your warehouse                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

Due to the use of pallet blanks produced by Pelletizer LTD, the design of the pallets will be such that the following characteristics will be provided:

— pallets will be reliable and convenient in operation;

— it will be possible to capture pallets not less than from two sides.

Our pallet board has no wood flaws, such as:

— blunt wane on more than one edge of any part;

— acute wane;

— mechanical damage, germination, decay, cancer and foreign inclusions.

Wood pellets – Wood pellets is biofuel produced from wood shavings, wood chips and other woodworking wastes. Pellets are cylindrical granules of standard size.

Production process:

The resulting mass is fed into a dryer, and then it goes from the dryer to a pellet press where wood dust is compressed into pellets. Compression during pressing increases the temperature of the material, resin is released from the wood particles and it boils and glues them into tight cylinders. To produce one ton of pellets it takes 4-5 cubic meters of waste wood. Ready-made granules are cooled, packed and delivered to the consumer.


Wood pellets is environmentally friendly fuel with ash content of 1.5% maximum. When burning pellets, atmospheric emissions of CO2 are as much as plants absorbed during their growth. Compared to standard wood, wood pellets have high dryness (8-12% of water content against 30-50% of water content in wood) and higher by about half density. These qualities provide a high heating value compared to the chips or fuel wood – when combustion of one ton of granules (pellets) approximately 5 thous. kW/h of heat is released, and this figure a half time exceeds the figure of the normal wood.

Fore more details about pellets, production process and advantages of the products please click here.

Wood pellets are divided into industrial (dark colored) and household (light colored).

Household (light colored) pellets are used for heating of dwelling houses through combustion in small boilers (pellet boilers), stoves and fireplaces. Generally, pellet diameter is 6—8 mm and length is 50 mm maximum, ash content is 0,5% maximum. Pellets are normally packed in 15-30 kg bags and laid down on pallets or packed in 800-1000 kg big bags. Industrial (dark colored) pellets with ash content of 1,5% maximum are burned in higher power boilers to get heat and power for settlements and industrial enterprises. Industrial pellets can have larger diameter.


Shipment of pellets is carried out by railway transport in bulk in grain cars (chopra) in batches of 50 tons on DAF basis – Belarusian border, or by road transport in 800-1000 kg big bags on FCA basis – warehouse of the Seller.

Laboratory analysis of our products (wood pellets):


Diameter, D mm 6,2
Length, L mm as per standard
Water content, M Ma, -% anl 0,1 5,2
Ash content, A(550*C) Ma, -% wf 0,1 0,36
Mechanic strength, DU Ma, -% anl 98,1
Fines, F (˂3,15mm) Ma, -% anl 0,1 0,7
Bulk density, BD kg/m3     anl 610
Lower calorific value, Q (Hu, p) MJ/kg   anl 0,2 18,50
Total nitrogen, N Ma, -% wf 0,05 0,06
Total sulfur, S Ma, -% wf 0,005 0,014
Total chlorine, Cl Ma, -% wf 0,005 0,015


Admixture elements

Arsenic mg/kg wf 0,8 ˂0,8
Plumbum mg/kg wf 2 ˂2
Cadmium mg/kg wf 0,2 ˂0,2
Chromium, total mg/kg wf 1 ˂1
Copper mg/kg wf 1 ˂1
Nickel mg/kg wf 1 ˂1
Mercury mg/kg wf 0,05 ˂0,05
Zinc mg/kg wf 1 9